HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 350

debug all Chapter 6 Debug Commands Send documentation comments to [email protected] debug all To enable debugging for all features on the switch, use the debug all command in EXEC mode. To disable this command and turn off all debugging, use the no form of the command. debug all no debug all Syntax Description This command has no arguments or keywords. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines The no debug all command turns off all diagnostic output. Using the no debug all command is a convenient way to ensure that you have not accidentally left any debug commands turned on. Caution Because debugging output takes priority over other network traffic, and because the debug all command generates more output than any other debug command, it can severely diminish the performance of the switch or even render it unusable. In virtually all cases, it is best to use more specific debug commands. Examples The following example displays the system output when the debug all command is issued: switch# debug all Related Commands Command show debug Description Displays the debug commands configured on the switch. Cisco MDS 9000 Family Command Reference 6-4 OL-16217-01, Cisco MDS SAN-OS Release 3.x