HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 924

scheduler aaa-authentication Chapter 21 S Commands Send documentation comments to [email protected] scheduler aaa-authentication To use the command scheduler feature, a remote user must use the scheduler aaa-authentication command to specify an AAA authentication password. scheduler aaa-authentication [username username] password [0 | 7] password Syntax Description password 0 7 password username username Specifies the password of the logged-in remote user for AAA authentication. Indicates the password is in clear text. Indicates the password is encrypted. Specifies the remote user's password. Specifies the remote user's name. Defaults None. Command Modes Configuration mode. Command History Release 3.0(3) Modification This command was introduced. Usage Guidelines This command is for remote users who need to use the scheduler feature. Examples The following example specifies a remote user's password. switch# config t switch(config)# scheduler aaa-authentication password newpwd The following example specifies a remote user's password in clear text. switch# config t switch(config)# scheduler aaa-authentication password 0 newpwd The following example specifies a remote user's encrypted password. switch# config t switch(config)# scheduler aaa-authentication password 7 newpwd2 The following example specifies a remote user's name and AAA authentication password. switch# config ts switch(config)# scheduler aaa-authentication username admin1 password newpwd3 21-6 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x