HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1498

username (iSCSI initiator configuration and iSLB initiator configuration) Chapter 24 U Commands Send documentation comments to [email protected] username (iSCSI initiator configuration and iSLB initiator configuration) To assign a username for iSCSI login authentication, use the username command in iSCSI initiator configuration submode. To assign a username for iSLB login authentication, use the username command in iSLB initiator configuration submode.To disable this feature, use the no form of the command. username username no username username Syntax Description username Specifies the username for iSCSI or iSLB login authentication. Defaults None. Command Modes iSCSI initiator configuration submode. iSLB initiator configuration submode. Command History Release 1.3(2) 3.0(1) Modification This command was introduced. Added iSLB initiator configuration submode. Usage Guidelines None. Examples The following example assigns the username for iSCSI login authentication of an iSCSI initiator. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# iscsi initiator name iqn.1987-02.com.cisco.initiator switch(config-iscsi-init)# username iSCSIloginUsername switch(config-iscsi-init)# The following example assigns the username tester for iSLB login authentication of an iSLB initiator. switch# config t switch(config)# islb initiator ip-address 100.10.10.10 switch(config-iscsi-islb-init)# username ? Enter username switch(config-iscsi-islb-init)# username tester The following example removes the username tester for an iSLB initiator. switch (config-iscsi-islb-init)# no username tester 24-8 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x