HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1318

show qos Chapter 22 Show Commands Send documentation comments to [email protected] show qos To display the current QoS settings along with a the number of frames marked high priority, use the show qos command. show qos {class-map [name class-name] | dwrr | policy-map [name policy-name] | service policy [interface fc slot/port | vsan vsan-id] | statistics} Syntax Description class-map name class-name dwrr policy-map name policy-name service policy interface fc slot/port vsan vsan-id statistics Displays QoS class maps. Specifies a class map name. The maximum length is 63 alpha-numeric characters. Displays deficit weighted round robin queue weights. Displays QoS policy-maps. Specifies a policy map name. The maximum length is 63 alpha-numeric characters. Displays QoS service policy associations. Specifies a Fibre Channel interface. Specifies a VSAN ID. The range is 1 to 4093. Displays QoS related statistics. Defaults None. Command Modes EXEC mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines To access all but the statistics option for this command, you must perform the qos enable command. Examples The following example displays the contents of all class maps. switch# show qos class-map qos class-map MyClass match-any match dest-wwn 20:01:00:05:30:00:28:df match src-wwn 23:15:00:05:30:00:2a:1f match src-intf fc2/1 qos class-map Class2 match-all match src-intf fc2/14 qos class-map Class3 match-all match src-wwn 20:01:00:05:30:00:2a:1f The following example displays the contents of a specified class map. 22-286 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x