HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1533

Chapter 27 Z Commands zone convert zone Send documentation comments to [email protected] zone convert zone To convert the zone member type from one type to another, use the zone convert zone command in the configuration mode. zone convert zoneset name source-member-type dest-member-type vsan vsan-id Syntax Description name source-member-type dest-member-type vsan vsan-id Displays the name of the zone or zoneset. All members of the specified zone or zoneset will be converted to the new type. Displays the member type of the members that have to be converted. The values of the supported source member types include fWWN, pWWN, Device-Alias, FCID, Interface and Interface-Domain. Displays the member type of the destination member. The values of the supported destination member types include fWWN, pWWN, Device-Alias, FCID, Interface, and Interface-Domain. Displays the VSAN ID. Defaults None. Command Modes Configuration mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines To use this command, all members have to be logged in. The conversion will fail even if a single member conversion is not achieved. Table 27-1 describes the conversion matrix of the member types supported by this command. Table 27-1 Conversion Matrix of the Member Types Source Member Types fWWN Interface Interface-Domain pWWN FCID Device-Alias Supported Destination Member Types pWWN, FCID, Device-alias, Interface, Interface-Domain pWWN, FCID, Device-alias, Interface, Interface-Domain pWWN, FCID, Device-alias, Interface FCID, Device-Alias pWWN, Device-Alias FCID, pWWN OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 27-9