HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 894

rmdir Chapter 20 R Commands Send documentation comments to [email protected] rmdir To delete an existing directory from the Flash file system, use the rmdir command in EXEC mode. rmdir [bootflash: | slot0: | volatile:]directory Syntax Description bootflash: slot0: volatile: directory Source or destination location for internal bootflash memory. Source or destination location for the CompactFlash memory or PCMCIA card. Source or destination location for volatile file system. Name of the directory to remove. Defaults Uses the current default directory. Command Modes EXEC Mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines This command is only valid on Flash file systems. The rmdir command deletes an existing directory at the current directory level or at a specified directory level. The directory must be empty to be deleted. Examples The following example deletes the directory called test in the slot0 directory. switch# rmdir slot0:test The following example deletes the directory called test at the current directory level. If the current directory is slot0:mydir, this command deletes the slot0:mydir/test directory. switch# rmdir test Related Commands Command dir mkir Description Displays a list of files on a file system. Creates a new directory in the Flash file system. 20-24 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x