HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 88

Navigating Through CLI Commands Chapter 1 CLI Overview Send documentation comments to [email protected] Using the no and Default Forms of Commands You can issue the no form of any command to perform the following actions: • Undo a wrongly issued command. If you issue the zone member command, you can undo the results: switch(config)# zone name test vsan 1 switch(config-zone)# member pwwn 12:12:12:12:12:12:12:12 switch(config-zone)# no member pwwn 12:12:12:12:12:12:12:12 WARNING: Zone is empty. Deleting zone test. Exit the submode. switch(config-zone)# • Delete a created facility If you want to delete a zone that you created: switch(config)# zone name test vsan 1 switch(config-zone)# exit switch(config)# no zone name test vsan 1 switch(config)# You cannot delete a zone facility called test while residing in it. You must first exit the zone submode and return to configuration mode. Port Names and Port Mapping The Cisco Fabric Switch for HP c-Class BladeSystem has a different port naming convention from the Cisco MDS 9000 Family. It has eight external ports and they are labeled ext1 through ext8. It has 16 internal ports and they are labeled bay1 through bay16. Table 1-5 shows the port mapping between the Cisco MDS 9000 Family and the Cisco Fabric Switch for HP c-Class BladeSystem. Table 1-5 Port Mapping Between the Cisco MDS 9000 Family and the Cisco Fabric Switch for HP c-Class BladeSystem Cisco MDS 9000 Family Port fc1/1 fc1/2 fc1/3 fc1/4 fc1/5 fc1/6 fc1/7 fc1/8 fc1/9 fc1/10 fc1/11 fc1/12 fc1/13 Cisco Fabric Switch for HP c-Class BladeSystem Port ext8 bay6 bay13 bay5 ext7 bay14 bay15 bay7 bay4 ext1 bay3 bay11 bay12 Port Group PortGroup 1 PortGroup 2 PortGroup 3 PortGroup 4 1-14 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x