HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1528

zone commit vsan Chapter 27 Z Commands Send documentation comments to [email protected] zone commit vsan To commit zoning changes to a VSAN, use the zone commit vsan command in configuration mode. To negate the command, use the no form of the command. zone commit vsan vsan-id [force] no zone commit vsan vsan-id [force] Syntax Description vsan vsan-id force Specifies the VSAN ID. The range is 1 to 4093. Forces the commit. Defaults None. Command Modes Configuration mode. Command History Release 2.0(1a) Modification This command was introduced. Usage Guidelines Use the no form of the zone commit vsan command to clear a session lock on a switch where the lock originated. Examples The following example commits zoning changes to VSAN 200. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# zone commit vsan 200 Related Commands Command show zone Description Displays zone information. 27-4 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x