HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 200

clear fc-redirect config vt Chapter 4 C Commands Send documentation comments to [email protected] clear fc-redirect config vt To delete a FC-Redirect configuration on a switch, use the clear fc-redirect config command. clear fc-redirect config vt vt-pwwn [local-switch-only] Syntax Description vt vt-pwwn local-switch-only Specify the VT pWWN for the configuration to be deleted. (Optional) The configuration is deleted locally only. Defaults None. Command Modes EXEC mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines This command is used as a last option if deleting the configuration through the application is not possible. This command will delete any configuration (including active configurations) on FC-Redirect created by applications such as SME/DMM that may lead to data loss. When you enter this command, the host server communicates to the storage array directly by passing the individual Intelligent Service Applications causing data corruption. Use this command as a last option to clear any leftover configuration that cannot be deleted from the application (DMM/SME). Use this command while decommissioning the switch. Examples The following example clears the FC-Redirect configuration on the switch. switch# clear fc-redirect config vt 2f:ea:00:05:30:00:71:64 Deleting a configuration MAY result in DATA CORRUPTION. Do you want to continue? (y/n) [n] y Related Commands Command show fc-redirect active-configs Description Displays all active configurations on the switch. 4-46 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x