HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1299

Chapter 22 Show Commands show npv internal info Send documentation comments to [email protected] show npv internal info To display internal N Port Virtualization (NPV) information, use the show npv internal info command. show npv internal info Syntax Description This command has no other arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the NPV internal information. switch# show npv internal info NPV Globals NPV mode: ENABLED Switch-Name: 172.20.150.98 Switch Mgmt IP Address: 172.20.150.98 proxy logo Retries: 1 Internal FLOGI max timeout Retries: -1 NS Registration max timeout Retries: 5 timer group handle: 0x30038fe0 Number of Active External Interfaces: 0 External Interface Info: Interface Information: ifindex: fc1/1, VSAN: 1, internal FLOGI fcid: 0x1e0000 FSM current state: NPIVP_EXT_IF_ST_FLOGI_FAILED Internal FLOGI Fail Reason: Mismatch in VSAN for this upstream port fabric pwwn: 20:05:00:05:30:00:ca:16, fabric nwwn: 20:0a:00:05:30:00:ca:17 my pwwn: 20:01:00:05:30:01:71:b8, my nwwn: 20:01:00:05:30:01:71:b9 Port Parameters: Rx B2B Credits: 16, Multiplier: 0, Buff Size: 2112 Tx B2B Credits: 16, Multiplier: 0, Buff Size: 2112, bbscn: 0 bbscn_capable: TRUE bbscn_max: 14, port_bbscn: 0 Timer & Retry Information: Busy Timer (1), id: 21045, active: FALSE time remaining: 0 Fail Retry Timer (7), id: 4209, active: TRUE time remaining: 1 FDISC Response Timer (2), id: 00, active: FALSE time remaining: 0 Error Clear Timer (6), id: 71, active: TRUE time remaining: 433 OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 22-267