HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 270

copy ssm-nvram standby-sup Chapter 4 C Commands Send documentation comments to [email protected] copy ssm-nvram standby-sup To copy the contents of the Storage Services Module (SSM) NVRAM to the standby Supervisor 2 module when migrating from a Supervisor 1 to Supervisor 2 module, use the copy ssm-nvram standby-sup command in EXEC mode. copy ssm-nvram standby-sup Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 3.0(1) Modification This command was introduced. Usage Guidelines This command should only be used for migrating from a Supervisor 1 to a Supervisor 2 module. When both modules in the switch are the same, you should not use this command; use the copy command instead. Examples The following example copies the contents of the SSM NVRAM to the standby Supervisor 2 module. switch# copy ssm-nvram standby-sup Related Commands Command copy Description Saves a backup of the system software. 4-116 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x