HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1054

show cfs Chapter 22 Show Commands Send documentation comments to [email protected] show cfs To display Cisco Fabric Services (CFS) information, use the show cfs command. show cfs {application [name app-name] | lock [name app-name] | merge status name app-name] | peers [name app-name] | status [name app-name]} Syntax Description application name app-name lock merge status peers status Displays locally registered applications. Specifies a local application information by name. Maximum length is 64 characters. Displays the state of application logical or physical locks. Displays CFS merge information. Displays logical or physical CFS peers. Displays if CFS distribution is enabled or disabled. Enabled is the default configuration. Defaults None. Command Modes EXEC mode. Command History Release 2.0(1b) 2.1(1a) 3.0(1) Modification This command was introduced. • Added status keyword. • Replaced vsan with fctimer for the fctimer application in the Application field in the command output. Modified the show cfs application example with output that shows which applications support CFS distribution over IP and Fibre Channel and those that support only CFS distribution over Fibre Channel. Usage Guidelines None. Examples The following example shows how to display CFS physical peer information for all applications. switch# show cfs peers Physical Fabric Switch WWN IP Address 20:00:00:05:30:00:61:de 172.22.46.223 [Local] 20:00:00:0d:ec:08:66:c0 172.22.46.233 20:00:00:05:30:00:f1:e2 172.22.46.225 20:00:00:05:30:00:eb:46 172.22.46.222 22-22 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x