HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 453

Chapter 6 Debug Commands debug sdv Send documentation comments to [email protected] debug sdv To enable debugging for SAN device virtualization, use the debug sdv command in EXEC mode. debug sdv {all | all-sdv | ddas {errors | events} | ddas-config {errors | events | packets} | discovery {errors vsan vsan-id | events vsan vsan-id} | distribution {errors vsan vsan-id | events vsan vsan-id} | errors vsan vsan-id | fu {ha | transition} | mgmt {errors | events} | ns {errors | events | packets} | rewrite {errors | events | packets} | trace vsan vsan-id | virtual-domain {errors vsan vsan-id | events vsan vsan-id} | zone-activation {errors | events | packets}} Syntax Description all all-sdv ddas errors events ddas-config packets discovery vsan vsan-id distribution errors fu ha mgmt ns rewrite trace virtual-domain zone-activation Configures all SDV debugs. Configures all filters for SDV debugging. Enables the DDAS debugs. Enables debugs for errors. Enables debugs for events. Enables the DDAS-CFG debugs. Enables debugs for packets. Enables the Disc debugs. Specifies the number of the VSAN. The range is 1 to 4093. Enables the Dist debugs. Enables the Error debugs. Enables the FU debugs. Enables the FU HA debugs. Enables the Config FSM debugs. Enables the NS debugs. Enables the Rewrite debugs. Enables the Trace debugs. Enables the Virtual Domain debugs. Enables the ZS-ACTV debugs. Defaults Disabled. Command Modes EXEC mode. Command History Release 3.1(2) Modification This command was introduced. Usage Guidelines None. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 6-107