HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 983

Chapter 21 S Commands streetaddress Send documentation comments to [email protected] streetaddress To configure the street address with the Call Home function, use the streetaddress command in Call Home configuration submode. To disable this feature, use the no form of the command. streetaddress {street-address} no streetaddress {street-address} Syntax Description street-address Specifies the customer's street address where the equipment is located. Allows up to 256 alphanumeric characters in free format for the street number, city, state, and zip (combined). Defaults None. Command Modes Call Home configuration submode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example shows how to configure the street address in the Call Home configuration. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# callhome switch(config-callhome)# streetaddress 1234 Picaboo Street, AnyCity, AnyState, 12345 Related Commands Command callhome callhome test show callhome Description Configures the Call Home function. Sends a dummy test message to the configured destination(s). Displays configured Call Home information. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 21-65