HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 118

Using Debug Commands Chapter 1 CLI Overview Send documentation comments to [email protected] The logging monitor command limits the logging messages displayed on terminal lines other than the console line to messages with a level up to and including the specified level argument. To display logging messages on a terminal (virtual console), use the terminal monitor privileged EXEC command. The no logging monitor command disables logging to terminal lines other than the console line. The following example sets the level of messages displayed on monitors other than the console to notification: logging monitor notification Logging Messages to a UNIX Syslog Server To log messages to a syslog server host, use the logging host global configuration command. The full syntax of this command follows: logging host {ip-address | host-name} [xml] no logging host {ip-address | host-name} [xml] The logging host command identifies a syslog server host that is to receive logging messages. The ip-address argument is the IP address of the host. By issuing this command more than once, you build a list of syslog servers that receive logging messages. The no logging host command deletes the syslog server with the specified address from the list of syslogs. Limiting Messages to a Syslog Server To limit the number of messages sent to syslog servers, use the logging trap router configuration command. The full syntax of this command follows: logging trap level no logging trap The logging trap command limits the logging messages sent to syslog servers to logging messages with a level up to and including the specified level argument. To send logging messages to a syslog server, specify its host address with the logging host command. The default trap level is informational. The no logging trap command returns the trap level to the default. The current software generates the following categories of syslog messages: • Error messages at the emergencies level. • Error messages at the alerts level. • Error messages at the critical level. • Error messages about software or hardware malfunctions, displayed at the errors level. • Interface up/down transitions and system restart messages, displayed at the notification level. • Reload requests and low-process stack messages, displayed at the informational level. • Output from the debug commands, displayed at the debugging level. 1-44 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x