HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 608

install module epld Chapter 11 I Commands Send documentation comments to [email protected] install module epld To upgrade the electrically programmable logical devices (EPLDs) module, use the install module epld command. This command is only for supervisor modules, not switching modules. install module module-number epld [bootflash: | ftp: | scp: | sftp: | tftp: | volatile:] Syntax Description module-number bootflash: ftp scp sftp tftp volatile: Enters the number for the standby supervisor modules or any other line card. Source location for internal bootflash memory. Local/Remote URI containing EPLD Image. Local/Remote URI containing EPLD Image. Local/Remote URI containing EPLD Image. Local/Remote URI containing EPLD Image. Source location for the volatile file system. Defaults None. Command Modes EXEC mode. Command History Release 1.2(1) Modification This command was introduced. Usage Guidelines Issue this command from the active supervisor module to update any other module. If you forcefully upgrade a module that is not online, all EPLDs are forcefully upgraded. If the module is not present in the switch, an error is returned. If the module is present, the command process continues. Do not insert or extract any modules while an EPLD upgrade or downgrade is in progress. Examples The following example upgrades the EPLDs for the module in slot 2. switch# install module 2 epld scp://[email protected]/users/dino/epld.img The authenticity of host '10.6.16.22' can't be established. RSA1 key fingerprint is 55:2e:1f:0b:18:76:24:02:c2:3b:62:dc:9b:6b:7f:b7. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.6.16.22' (RSA1) to the list of known hosts. [email protected]'s password: epld.img 100 1269 KB 00:00 Module Number 2 EPLD Curr Ver New Ver Power Manager 0x06 XBUS IO 0x07 0x08 11-16 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x