HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 864

qos dwrr-q Chapter 19 Q Commands Send documentation comments to [email protected] qos dwrr-q To associate a weight with a deficit weighted round robin (DWRR) scheduler queue, use the qos dwrr-q command in configuration mode. To remove a previously-configured class, use the no form of the command. qos dwrr-q {high | low | medium} weight value no qos dwrr-q {high | low | medium} weight value Syntax Description high low medium weight value Assigns the DWRR queue high option to DWRR queues. Assigns the DWRR queue low option to DWRR queues. Assigns the DWRR queue medium option to DWRR queues. Specifies DWRR queue weight Defaults 10 Command Modes Configuration mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines You can access this command only if you enable the QoS data traffic feature using the qos enable command. Examples The following example specifies the DWRR queue priority. switch# config terminal switch(config)# qos dwrr-q high weight 50 The following example reverts to the default value of 10. switch(config)# no qos dwrr-q high weight 50 Related Commands Command show qos Description Displays configured QoS information. 19-4 Cisco MDS 9000 Family Command Reference OL-16217-01 Cisco MDS SAN-OS Release 3.x