HP LaserJet 5000 Service Manual - Page 154
Control Panel Overlay and Control Panel, the underside of the Top Cover. See
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Control Panel Overlay and Control Panel 1 Remove the Top Cover (page 6-12). 2 The Control Panel Overlay is held in place on the Top Cover by two tabs on each side. Slide a small flat-blade screwdriver along the outside edge of the Control Panel Overlay, to disengage the two tabs on the outside of the cover. 3 Lift the Overlay off of the Control Panel. Figure 6-7 Releasing Control Panel Overlay 4 Remove the single self-tapping screw holding the Control Panel to the underside of the Top Cover. 5 Lift up on the metal plate gently to free the Control Panel. 6 Grasp the Control Panel by the metal frame and remove it from the underside of the Top Cover. See Figure 6-8, "Back Side of Top Cover," on page 6-16. EN Removing Covers 6-15
EN
Removing Covers
6-15
Control Panel Overlay and Control Panel
1
Remove the Top Cover (page 6-12).
2
The Control Panel Overlay is held in place on the Top Cover by
two tabs on each side. Slide a small flat-blade screwdriver along
the outside edge of the Control Panel Overlay, to disengage the
two tabs on the outside of the cover.
3
Lift the Overlay off of the Control Panel.
Figure 6-7
Releasing Control Panel Overlay
4
Remove the single self-tapping screw holding the Control Panel
to the underside of the Top Cover.
5
Lift up on the metal plate gently to free the Control Panel.
6
Grasp the Control Panel by the metal frame and remove it from
the underside of the Top Cover. See Figure 6-8, “Back Side of Top
Cover,” on page 6-16.