HP LaserJet 5000 Service Manual - Page 52

Paper Handling Menu When paper handling settings are correctly configured through the Control Panel, you can print by choosing the type and size of paper from the printer driver or software application. Some items in this menu (such as duplex and manual feed) can be accessed from a software application, or from the printer driver (if the appropriate driver is installed). Printer driver and software application settings override Control Panel settings. Table 3-5. Paper Handling Menu Item Values Explanation TRAY 1 MODE= FIRST FIRST CASSETTE Determine how the printer will use Tray 1. FIRST: If paper is loaded in Tray 1, the printer will pull paper from that tray first. CASSETTE: A paper size must be assigned to Tray 1 using the TRAY 1 SIZE option (the next item in this menu when TRAY 1 MODE=CASSETTE). This allows Tray 1 to be used as a reserved tray. TRAY 1 SIZE= LETTER For supported paper types see page 1-14. This item appears only when TRAY 1 MODE= CASSETTE. Set the value to correspond with the paper size currently loaded in Tray 1. TRAY 1 TYPE= PLAIN For supported paper types see page 1-14. This item appears only when TRAY 1 MODE= CASSETTE. Set the value to correspond with the paper type currently loaded in Tray 1. TRAY 2 TYPE= PLAIN For supported paper types Set the value to correspond with the see page 1-14. paper type currently loaded in Tray 2. TRAY 3 TYPE= PLAIN For supported paper types see page 1-14. This item appears only when a third paper tray is installed. Set the value to correspond with the paper type currently loaded in Tray 3. EN Control Panel Menus 3-7