HP LaserJet 5000 Service Manual - Page 241
Install Tray X, Loading, Program <number>, Do Not Power Off, Manually Feed, Type] [size]
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Table 7-5. Alphabetical Printer Messages (continued) Control Panel Message Event Log Explanation Message Recommended Action INSTALL TRAY x The printer is unable to 1. Re-insert the specified print the current job tray. because the specified tray 2. Check for damaged (x) is open or not inserted tabs in the tray. correctly. 3. Check for damaged switches in the printer. 4. Replace the PCA Controller in the feeder. LOADING PROGRAM alternates with DO NOT POWER OFF Programs and fonts can Wait for the program to be stored on the printer's load. file system. At bootup time these entities are loaded into RAM. (These entities can take a long time to load into RAM depending on the size and number of entities being loaded.) The specifies a sequence number indicating the current program being loaded. MANUALLY FEED [TYPE] [SIZE] One of the following 1. Load the requested occurred: paper into Tray 1. A manual feed was 2. Press [Go] if the requested. desired paper is already There is no paper in loaded in Tray 1. Tray 1. 3. Press [-Value+] to The wrong size of paper is scroll through the loaded. available types and sizes. The Control Panel is not 4. Press [Select] to set for the kind of paper accept the alternate type loaded. or size. 7-20 Troubleshooting EN