HP LaserJet 5000 Service Manual - Page 67
Ram Disk, Size=xxxk, Disk=auto, Jam Recovery, Paper, Reforming=off, Value+]
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Table 3-8. Configuration Menu (continued) Item Values Explanation RAM DISK SIZE=xxxK 0K and up (This value depends on the amount of installed memory.) Determine the size of the RAM disk. This item appears if RAM DISK=ON or AUTO. Press [-Value+] to change settings by increments of 100. Note This setting cannot be changed if RAM DISK=AUTO. Changing this value will cause the printer to reinitialize when it becomes idle. JAM RECOVERY= AUTO AUTO ON OFF Determine how the printer behaves when a paper jam occurs. AUTO: The printer automatically selects the best mode for printer jam recovery (usually ON). This is the default setting. ON: The printer automatically reprints pages after a paper jam is cleared. OFF: The printer does not reprint pages following a paper jam. Printing performance might be increased with this setting. PAPER OFF REFORMING=OFF ON Paper reforming has two main purposes: 1. To reduce jams, wrinkles, and bent corners when printing on both sides of a sheet of paper (duplexing). 2. To reduce bent corners and wrinkles when printing on one side of a sheet of narrow media (such as legal, rotated letter, or rotated A4). Print speed will be slower when PAPER REFORMING=ON. 3-22 Printer Operation EN