HP LaserJet 5000 Service Manual - Page 237

Hint Note Printer Messages The following table explains messages that might display on the printer's Control Panel. Alphabetical printer messages and their meanings are listed in Table 7-5, and numerical printer messages are listed in Table 7-6. If the message persists requesting that you load a tray, or if a message indicates that a previous print job is still in the printer's memory, press [GO] to print or press [Cancel Job] to clear the job from the printer's memory. Not all messages are described (many are self-explanatory). Some printer messages are affected by the Auto Continue and Clearable Warning settings from the Configuration Menu in the printer's Control Panel. If CLEARABLE WARNING=JOB is set on the Control Panel, warning messages display on the Control Panel until the end of the job from which they were generated. If CLEARABLE WARNING=ON is set, warning messages display on the Control Panel until [Go] is pressed. If an error occurs that prevents printing and AUTO CONTINUE=ON is set, the printer goes offline for 10 seconds before it returns online. If AUTO CONTINUE=OFF is set, the message displays until [Go] is pressed. Table 7-5. Alphabetical Printer Messages Control Panel Message Event Log Explanation Message Recommended Action ACCESS DENIED MENUS LOCKED The Control Panel function you are trying to access has been locked by the network administrator to prevent unauthorized access. Ask the Network Administrator to unlock the function. BAD DUPLEXER CONNECTION The Duplexer is not connected properly. 1. Re-install the duplexer. 2. If the message persists make sure the duplexer is connected and the connector is not damaged. 3. Replace the Duplexer. 7-16 Troubleshooting EN