HP LaserJet 5000 Service Manual - Page 81
Resetting the Printer, Cold Reset, Clearing NVRAM
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Resetting the Printer CAUTION Cold Reset Cold Reset clears all data from the printer memory and sets all the defaults back to the factory settings. Performing a Cold Reset resets the JetDirect configuration. To avoid making changes to your configuration, remove the JetDirect card before performing a cold reset. If possible, print a Configuration Page prior to performing a Cold Reset. This will document current settings for later reference. To perform a cold reset: 1 Turn off the printer. 2 While pressing [Go], turn the printer on. COLD RESET appears briefly on the display, then INITIALIZING appears. After a few seconds, RESTORING FACTORY SETTINGS appears on the display, followed by OFFLINE. The cold reset is complete. 3 Press [Go] to return the printer online. READY appears on the display. Clearing NVRAM This procedure will clean up the NVRAM by removing old areas that are not being used. 1 Turn off the printer. 2 While pressing [Cancel Job] turn the printer on. CLEANUP NVRAM appears briefly on the display, followed by INITIALIZING. After a few seconds READY appears. 3-36 Printer Operation EN