HP LaserJet 5000 Service Manual - Page 75
Service Mode, To enter Service Mode
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Service Mode Service Mode should be used only by authorized service personnel. While in Service Mode, you can: q Verify and set the page count and serial number. These are displayed on the Configuration Page. q Set the Cold Reset Default. (This sets the factory default paper size to either Letter or A4). q Turn the Diagnostic Functions on or off (for developers only). q Clear the event log. q Set the interval at which the PERFORM PRINTER MAINTENANCE message appears on the control panel. To enter Service Mode: 1 Hold down [Select] and [Cancel Job] while turning on the printer. (If the control panel reads INITIALIZING, the keys were released too soon.) 2 Press the right side of the [Menu] key, then press [Select]. The message SERVICE MODE is displayed. To exit the Service Mode press [Go]. 3-30 Printer Operation EN