HP LaserJet 5000 Service Manual - Page 59

Table 3-7. Printing Menu (continued) Item Values Explanation UNIT OF MEASURE=INCHES (110 V printers) or MILLIMETERS (220 V printers) INCHES MILLIMETERS This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the unit of measurement for the custom paper size. X DIMENSION= 12.28 INCHES (110 V printers) or 312 MILLIMETERS (220 V printers) 3.00 to 12.28 INCHES (110 V printers) or 76 to 312 MILLIMETERS (220 V printers) This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the dimension to be fed into the printer (short edge). Y DIMENSION= 18.50 INCHES (110 V printers) or 470 MILLIMETERS (220 V printers) 5.00 to 18.50 INCHES (110 V printers) or 127 to 470 MILLIMETERS (220 V printers) This item appears only when CONFIGURE CUSTOM PAPER=YES. Select the other dimension (long edge). ORIENTATION= PORTRAIT PORTRAIT LANDSCAPE Determine the default orientation of print on the page. Note It is best to set the page orientation from the printer driver or software application. (Driver and software settings override Control Panel settings.) FORM=60 LINES (110 V printers) or 64 LINES (220 V printers) 5 to 128 Sets vertical spacing from 5 to 128 lines for default paper size. Press [-Value+] once to change the setting by increments of 1, or hold down [-Value+] to scroll by increments of 10. 3-14 Printer Operation EN