HP LaserJet 5000 Service Manual - Page 94
Power Supply System, AC/DC Power Distribution
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Power Supply System AC/DC Power Distribution The AC line voltage for the printer is applied through the main switch (SW101) and supplied to the low-voltage power supply circuit through the fuse (FU1). The low-voltage power supply divides the AC voltage to +24 VDC, +5 VDC and +3.4 VDC and supplies them to the DC controller PCA. This circuit generates a zero-cross signal (ZEROX) and supplies it to the DC controller PCA. +3.4 VDC is supplied to ICs on the DC controller PCA and the BD PCA. +5 VDC is supplied to the laser driver PCA and sensors. +24 VDC is supplied to the high-voltage power supply PCA to drive the main motor, the exhaust fan, the scanner motor, the clutches, and the solenoids. +24 VDC is divided into +24 Vdr, which stops when the top cover is opened and SW401 on the terminal PCA turns off, and _24V, which is always supplied regardless of whether SW401 turns on or off. EN Power Supply System 5-3