HP LaserJet 5000 Service Manual - Page 202
Registration Assembly,
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
Registration Assembly 1 Remove the Top Cover (page 6-12), Left Side Cover (page 6-23), Pickup Gear Assembly (page 6-36), and the Main Gear Assembly (page 6-34). 2 Release the E-ring on the Registration Assembly Clutch, and remove the Clutch (Figure 6-34 on page 6-43). 3 Remove the two "common" machine screws in the top middle of the printer. (These screws are already removed if you have removed the Paper Feed Roller Assembly. They are common between the Paper Feed Roller Assembly and the Registration Assembly. Refer to page 6-44 for screw location.) 4 Remove the four self-tapping screws inside the chassis. (Lift up the small green handle of the Registration Assembly to access two of these screws.) 5 Lift the Registration assembly out of the chassis. Figure 6-52 Registration Assembly Item A EN Explanation Screw location Removing Assemblies 6-63