HP LaserJet 5000 Service Manual - Page 63

Table 3-8. Configuration Menu (continued) Item Values Explanation RESOURCE SAVE= OFF OFF Dedicate printer memory to save each ON language's permanent resources. (You AUTO might need to add memory to the printer in (8 MB total is required to order for this item to appear.) The amount see this message.) of memory set aside can be different for each installed language. Some languages might have memory set aside for resource saving without requiring all languages to do so. Any time the amount of memory dedicated to a specific language is changed, all languages will lose all saved resources, including any unprocessed print jobs. OFF: No language resource saving is performed, and language-dependent resources, such as fonts and macros, are lost when language or resolution changes. ON: An item will appear for each installed language that allows the user to allocate a particular amount of memory to that language's resource saving area. (See the items below.) AUTO: The printer automatically determines the amount of memory to use for each installed language's resource saving area. PCL MEMORY= 400K 0K and up (This value depends on the amount of installed memory. 8 MB total is required to see this message.) This item appears only when RESOURCE SAVE=ON. Select the amount of memory used for saving PCL resources. Printer default is the minimum amount of memory needed to perform resource saving for PCL. Press [-Value+] to change settings by increments of 10 (up to 100 KB) or by increments of 100 (above 100 KB). 3-18 Printer Operation EN