HP LaserJet 5000 Service Manual - Page 62
Configuration Menu, Table 3-8. Configuration Menu, Values, Explanation
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Configuration Menu Items in this menu affect the printer's behavior. Configure the printer according to your printing needs. Table 3-8. Configuration Menu Item Values Explanation POWERSAVE= 30 MINUTES OFF 15 MINUTES 30 MINUTES 1 HOUR 2 HOURS 3 HOURS Set the printer to enter PowerSave after it has been idle for a specified amount of time. Turning PowerSave off is not recommended. The PowerSave feature does the following: 1. Minimizes the amount of power consumed by the printer when it is idle. 2. Reduces wear on the printer's electronic components. (Turns off the display's backlight.) When you send a print job, press a Control Panel key, open a paper tray, or open the top cover, the printer automatically comes out of PowerSave mode. Note PowerSave turns off the backlight on the display, but the display is still readable. PERSONALITY= AUTO AUTO PCL PS Select the default printer language (personality). Possible values are determined by which valid languages are installed in the printer. Normally you should not change the printer language (the default is AUTO). If you change it to a specific printer language, the printer will not automatically switch from one language to another unless specific software commands are sent to the printer. EN Control Panel Menus 3-17