HP LaserJet 5000 Service Manual - Page 193
Tray 2 Shaft,
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
Tray 2 Shaft 1 Remove the Top Cover (page 6-12), Left and Right Side Covers (page 6-23), Pickup Gear Assembly (page 6-36), and Paper Handling PCA (page 6-31). 2 Remove the spring from the gear on the left side of the shaft. 3 Align the solenoid arm (B) (see Figure 6-43) with the gap in the gear (on the left side of the printer). 4 Press the release tabs (A) outward, and slide the gear off the shaft. 5 Remove the bushing on the right side of the shaft by lifting the release tab and sliding it off the shaft. 6 Slide the shaft to the right, then angle it out of the chassis. Figure 6-43 Tray 2 Shaft (left side view of printer) Item A B C Explanation Release Tabs Solenoid Arm Gap 6-54 Removing and Replacing Parts EN
6-54
Removing and Replacing Parts
EN
Tray 2 Shaft
1
Remove the Top Cover (page 6-12), Left and Right Side Covers
(page 6-23), Pickup Gear Assembly (page 6-36), and Paper
Handling PCA (page 6-31).
2
Remove the spring from the gear on the left side of the shaft.
3
Align the solenoid arm (B) (see Figure 6-43) with the gap in the
gear (on the left side of the printer).
4
Press the release tabs (A) outward, and slide the gear off the
shaft.
5
Remove the bushing on the right side of the shaft by lifting the
release tab and sliding it off the shaft.
6
Slide the shaft to the right, then angle it out of the chassis.
Figure 6-43
Tray 2 Shaft (left side view of printer)
Item
Explanation
A
Release Tabs
B
Solenoid Arm
C
Gap