HP LaserJet 5000 Service Manual - Page 255
xy.zz, PRINTER ERROR, Invalid DIMM speed
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
Table 7-6. Numerical Printer Messages (continued) Control Panel Message Event Explanation Log Message Recommended Action 53.xy.zz PRINTER ERROR There is a memory error with an accessory. The DIMM that caused the error will not be used. Values of x, y, and zz are as follows: x=DIMM type 0=ROM 1=RAM 1. Turn the printer off, and reseat or replace the specified DIMM. 2. Try the DIMM in another slot. 3. Replace the DIMM that caused the error. y=Device location 0=internal memory (ROM or RAM) 1 to 3=DIMM slots 1, 2, or 3 zz=Error number 0=Unsupported memory 1=Unrecognized memory 2=Unsupported memory size 3=Failed RAM test 4=Exceeded maximum RAM size 5=Exceeded maximum ROM size 6=Invalid DIMM speed 7=DIMM reporting information incorrectly 8=DIMM RAM parity error 9=ROM needs to be mapped to an unsupported address 10=DIMM address conflict 11=PDC XROM out of bounds 12=Unable to make a temporary mapping 7-34 Troubleshooting EN