HP LaserJet 5000 Service Manual - Page 250
Eio X, Buffer Overflow, Press Go To, Continue, Parallel I/o, Serial I/o, Print A Menu Map
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Table 7-6. Numerical Printer Messages (continued) Control Panel Message Event Explanation Log Message Recommended Action 22 EIO x BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE Too much data was sent to Press [Go] to clear the the EIO card in the message. (Data will be specified slot (x). lost.) 22 PARALLEL I/O BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE Too much data was sent to Check for a loose cable the parallel port. connection and be sure to This error can occur if the use a high-quality cable. driver you are using is not (Some non-HP parallel IEEE-1284 compliant. For cables might be missing best results, use an HP pin connections, or might driver that came with the otherwise not conform to printer. the IEEE-1284 specification.) Press [Go] to clear the error message. (Data will be lost.) 22 SERIAL I/O BUFFER OVERFLOW alternates with PRESS GO TO CONTINUE Too much data was sent to 1. Make sure the correct the serial port. serial pacing option is selected from the I/O Menu in the printer's Control Panel. 2. Print a Menu Map and verify that the serial pacing item (from the I/O Menu in the printer's Control Panel) matches the setting on the computer. 3. Press [Go] to clear the error message. (Data will be lost.) EN Troubleshooting the Printing System 7-29