HP LaserJet 5000 Service Manual - Page 170
Paper Handling PCA
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Paper Handling PCA 1 Remove the Top Cover (page 6-12) and Left Side Cover (page 6-23). 2 Facing the left side of the printer, disconnect the ribbon cable from the PCA. 3 Remove two self-tapping screws and two machine screws from the PCA. 4 Rotate the PCA outward, and disconnect the five cables. See Figure 6-23. Figure 6-23 Paper Handling PCA Item A B Explanation Cables Ribbon Cable Hint To install a self-tapping screw, first turn it to the left until it clicks, indicating the threads are seated. Then, turn it to the right to tighten. Do not over-tighten. If a self-tapping screw-hole becomes stripped, repair of the screw-hole or replacement of the affected assembly is required. EN Removing Assemblies 6-31
EN
Removing Assemblies
6-31
Paper Handling PCA
1
Remove the Top Cover (page 6-12) and Left Side Cover
(page 6-23).
2
Facing the left side of the printer, disconnect the ribbon cable
from the PCA.
3
Remove two self-tapping screws and two machine screws from
the PCA.
4
Rotate the PCA outward, and disconnect the five cables. See
Figure 6-23.
Figure 6-23
Paper Handling PCA
Hint
To install a self-tapping screw, first turn it to the left until it clicks,
indicating the threads are seated. Then, turn it to the right to tighten.
Do not over-tighten
. If a self-tapping screw-hole becomes stripped,
repair of the screw-hole or replacement of the affected assembly is
required.
Item
Explanation
A
Cables
B
Ribbon Cable