HP LaserJet 5000 Service Manual - Page 252
Unexpected, Paper Size, Printer Error, Press Go To, Continue, Replace The Laser - 41 3 unexpected paper size
View all HP LaserJet 5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 252 highlights
Table 7-6. Numerical Printer Messages (continued) Control Panel Message Event Explanation Log Message Recommended Action 41.3 UNEXPECTED PAPER SIZE The paper size you are trying to print is not the same as the settings for the tray. 1. Make sure that all trays are correctly adjusted for size.The size displayed on the front of the paper tray must match the size of paper loaded in the tray. (The printer will continue trying to print the job until size settings are correct.) If you are trying to print from Tray 1, make sure the printer's Control Panel setting for paper size is correctly configured. 2. After performing the actions above, press [Go]. The page containing the error will automatically be reprinted. (Or, you might want to press [Cancel Job] to clear the job from the printer's memory.) 41.x PRINTER ERROR alternates with PRESS GO TO CONTINUE A temporary printing error occurred. X Description 1 Unknown misprint error. 2 Beam detect error. 4 No VSYNC error. 5 Media feed error. 9 Noise VSREQ error. Press [Go]. The page containing the error will automatically be reprinted. If the error persists: 1. Reseat the connections to the Laser Scanner and the Engine Controller Board. 2. Replace the Laser Scanner. 3. Replace the Engine Controller Board. EN Troubleshooting the Printing System 7-31