HP LaserJet 5000 Service Manual - Page 66

Table 3-8. Configuration Menu (continued) Item Values Explanation MOPIER MODE=STANDARD STANDARD ENHANCED OFF Determine how the mopier functions behave. This item appears only when there is at least 8 MB of memory or an optional hard disk is installed. STANDARD: This option is available if there is either a hard disk installed or a RAM disk configured in memory. This option uses I/O data stored in printer memory for generating multiple original prints. (All copies will print at the same speed as the first copy.) ENHANCED: This option is available if there is a hard disk installed and at least 8 MB of memory. This option uses engine video data for printing multiple original prints and should print all copies after the first at the printer's maximum speed. OFF: Disables the mopier functions. (The printer will not spool any jobs to the hard disk.) When the mopier mode is changed, any downloaded resources (such as fonts or macros) will need to be downloaded again, unless they are stored on an optional hard disk or flash DIMM. RAM DISK=OFF OFF ON AUTO Determine how the RAM disk is configured. This item appears only if there is no optional hard disk installed and the printer has at least 8 MB of memory. OFF: The RAM disk is disabled. ON: The RAM disk is enabled. Configure the amount of memory to be used through the following item: RAM DISK SIZE. Note If the setting is changed from OFF to ON or from OFF to AUTO, the printer will automatically reinitialize when it becomes idle. EN Control Panel Menus 3-21