HP Scitex LX600 HP Scitex LX Printer Family - Maintenance and troubleshooting - Page 51

Substrate issues

Get HP Scitex LX600 PDF manuals and user guides View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Substrate issues 3. Check that there is no telescoping of the input roll. 4. Check that the substrate edge holders are correctly positioned. 5. LX800 only: Try using the diverter rollers from the ink collector kit. You are recommended to use both diverters when printing on self-adhesive substrates, and the output diverter (only) when printing on fabrics. 6. Try increasing the substrate tension. 7. Try reducing the drying and curing temperatures, and minimize the difference between the two temperatures. 8. LX800 only: Consider changing the printer configuration. The roll-to-free-fall configuration is least prone to wrinkles. 9. If you cannot get rid of the wrinkles, try raising the carriage beam slightly, so that the printhead is not so close to the substrate. For information on how to adjust printer settings, see the User's guide. ENWW There are wrinkles in the substrate 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
3.
Check that there is no telescoping of the input roll.
4.
Check that the substrate edge holders are correctly positioned.
5.
LX800 only: Try using the diverter rollers from the ink collector kit. You are recommended to use
both diverters when printing on self-adhesive substrates, and the output diverter (only) when
printing on fabrics.
6.
Try increasing the substrate tension.
7.
Try reducing the drying and curing temperatures, and minimize the difference between the two
temperatures.
8.
LX800 only: Consider changing the printer configuration. The roll-to-free-fall configuration is
least prone to wrinkles.
9.
If you cannot get rid of the wrinkles, try raising the carriage beam slightly, so that the printhead is
not so close to the substrate.
For information on how to adjust printer settings, see the
User's guide
.
ENWW
There are wrinkles in the substrate
45
Substrate issues