HP Scitex LX600 HP Scitex LX Printer Family - Maintenance and troubleshooting - Page 59

Colors are misaligned horizontally, setting in the HP Internal Print Server.

Get HP Scitex LX600 PDF manuals and user guides View all HP Scitex LX600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

2. If magenta prints higher on the substrate than the other colors, increase the substrate-advance setting in the HP Internal Print Server. Print-quality issues If magenta prints lower on the substrate than the other colors, decrease the substrate-advance setting in the HP Internal Print Server. If the misalignment appears to be random, try the solutions recommended for banding (see Banding on page 49). Colors are misaligned horizontally 1. Check printhead alignment and correct it if necessary. See Align the printheads on page 7. 2. If the problem persists despite automatic printhead alignment, try manual printhead alignment. 3. Ensure that the substrate is not skewed. If there is any skew, reload the substrate to correct it. 4. Check the carriage beam position. If it is high and the substrate type doesn't require a high position, lower it. ENWW Colors are misaligned 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
2.
If magenta prints higher on the substrate than the other colors, increase the substrate-advance
setting in the HP Internal Print Server.
If magenta prints lower on the substrate than the other colors, decrease the substrate-advance
setting in the HP Internal Print Server.
If the misalignment appears to be random, try the solutions recommended for banding (see
Banding
on page
49
).
Colors are misaligned horizontally
1.
Check printhead alignment and correct it if necessary. See
Align the printheads
on page
7
.
2.
If the problem persists despite automatic printhead alignment, try manual printhead alignment.
3.
Ensure that the substrate is not skewed. If there is any skew, reload the substrate to correct it.
4.
Check the carriage beam position. If it is high and the substrate type doesn't require a high
position, lower it.
ENWW
Colors are misaligned
53
Print-quality issues