HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 116

2 configure configure Changes system configuration settings. Synopsis configure Description Use this command to change the following system configuration settings for the switch: • Switch fabric settings • Virtual channel parameters • F_Port login parameters • Zoning operation parameters • Remote State Change Notifications (RSCN) transmission mode • Arbitrated Loop Parameters • System Services Settings • Portlog Events enable or disable Settings • Secure Socket Layer (SSL) attributes • Remote Procedure Call Daemon (RPCD) attributes • cfgload attributes • Webtools attributes • System settings Notes To access all parameters controlled by this command, you must disable the switch using the switchDisable command. If executed on an enabled switch, only a subset of attribute can be configured. The Telnet interface is no longer configurable with this command. Use the ipFilter command to enable or disable the Telnet interface. The SNMP attributes are no longer configurable with this command. Use snmpConfig --set seclevel to configure SNMP attributes. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none The configure command runs in interactive mode and presents you with a series of hierarchical menus. Each top-level menu and its associated submenus consist of a text prompt, a selection of valid values, and a default value (in brackets). The following keys control the execution of the command: Return When entered at a prompt with no preceding input, the command accepts the default value (if applicable) and moves to the next prompt. Interrupt (Ctrl-C) Aborts the command immediately and ignores all changes made. End-of-file (Ctrl-D) When entered at a prompt with no preceding input, terminates the command and saves changes made. The following parameters can be modified with the configure command: 90 Fabric OS Command Reference 53-1000599-02