HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 507

portEnable 2 portEnable Enables a port. Synopsis portenable [slot/]port Description Use this command to enable a port. If a port is connected to another switch when enabled, the fabric may reconfigure. Devices connected to the port can now communicate with the fabric. For ports that come online after being enabled, the following indications might be sent to indicate a state transition: RSCN, SNMP trap, Web pop-up window. This command fails if the port's switch is disabled, the port's blade is not fully enabled (faulted, powered off, or disabled), or if the port is persistently disabled. Notes The front panel LED of an enabled and online port is green. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to be enabled, followed by a slash (/). port Specify a port number to be enabled, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To enable a port: switch:admin> portenable 2/4 See Also portCfgPersistentDisable, portCfgPersistentEnable, portDisable, portShow, switchShow Fabric OS Command Reference 481 53-1000599-02