HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 135

diagSetCycle 2 diagSetCycle Sets diagnostic script parameters. Synopsis diagsetcycle script [-show | -default | [-keyword value]] Description Use this command to update diagnostic command parameters. If only a script is specified, the command displays all configuration variables used by the specified script and enters an interactive session. Using the full parameters, variables can be updated noninteractively. In interactive mode, the current value, default value, and description of purpose of the variable are displayed for each variable. If no new value is specified, the current value is left unchanged. If a new value is entered, its value is updated and stored in the configuration database for that blade type. This command does not require a reboot to take effect. It is recommended to run the burninErrClear command prior to running diagSetBurnin and diagSetCycle. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: script Specify a script in which you want to change parameters. -show Displays the parameters for the specified diagnostic script. -default Specify this operand to set the script parameters to default values. -keyword value The script parameters can be updated noninteractively with the -keyword option. the specified value is the keyword to update. Examples To update diagnostic command parameters: switch:admin> diagsetcycle switchburnin.sh -show CURRENT - KEYWORD : DEFAULT 1 - number_of_runs : 1 2 - vib : 2 10 - thermal : 10 BURNIN - label : BURNIN 1 - tbr_passes : 1 1 - prt_on : 1 1 - cntmem_on : 1 1 - cmi_on : 1 1 - retention_on : 1 1 - cam_on : 1 50 - flt_passes : 50 25 - sta_passes : 25 100 - plb_nframes : 100 50 - txd_nframes : 50 200 - xpt_nframes : 200 20 - bpt_nframes : 20 50 - slk_nmegs : 50 30 - bpt_all_nframes: 30 50 - slk_all_nmegs : 50 See Also burninLevel, diagSetBurnin, diagStopBurnin Fabric OS Command Reference 109 53-1000599-02