HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 635

snmpConfig 2 SCSI-MIB SW-TRAP FA-TRAP SW-EXTTRAP FICON-TRAP HA-TRAP Specifying yes means you can access FCIP-MIB variables with an SNMP manager. The default value is yes. Specifying yes means the SNMP management application can receive SW-TRAPS from the switch. The default value is "yes". You may also turn individual SW Traps on or off. The individual SW traps are swFCPortScn, swEventTrap, swFabricWatchTrap and swTrackChangesTrap. Specifying yes means the SNMP management application can receive FA-TRAPS from the switch. The default value is "yes". You may also turn individual FA Traps on or off. The individual FA Traps are connUnitStatusChange, connUnitEventTrap, connUnitSensorStatusChange and connUnitPortStatusChange. Specifying yes means you can receive SSN in the SW traps. The default value is "no". Specifying yes means the SNMP management application can receive FICON traps from the switch. The default value is "yes". You may also turn individual FICON Traps on or off. The individual FICON Traps are link RN ID Device Registration, linkRNIDDeviceDeRegistration, linkLIRRListenerAdded, linkLIRRListenerRemoved and linkRLIRFailureIncident. Specifying yes means the SNMP management application can receive HA traps from the switch. The default value is "yes". You may also turn individual individual HA Traps on or off. The individual HA Traps are fruStatusChanged, cp Status Changed, and fruHistoryTrap. System Group Configuration Parameters sysDescr The system description. The default value is Fibre Channel Switch. sysLocation The location of the system (switch). The default value is End User Premise. sysContact The contact information for this system (switch). The default value is Field Support. Refer to the definition of sysDescr, sysLocation and sysContact in system group of MIB-II. authTraps When enabled, the authentication trap (authenticationFailure) is transmitted to a configured trap recipient in the event that the agent receives a protocol message that is not properly authenticated. In the context of SNMPv1 and SNMPv2c, this means that a request contains a community string that is not known to the agent. The default value for this parameter is 0 (disabled). Security Level Parameters The --show option displays the current SNMP security and SNMP SET security levels. Use --set secLevel to modify existing settings: SNMP security level Specifies security level for all SNMP requests. SNMP SET security level Specifies security level for SNMP SET requests only. Values are: 0 No security. 1 Authentication only. 2 Authentication and Privacy. 3 OFF Fabric OS Command Reference 609 53-1000599-02