HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 494
help for an explanation, To display FCIP tunnels con d on a GbE port. refer to
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 494 highlights
2 portCfgShow To display the configuration settings for a single port: switch:admin> portcfgshow 2/16 Area Number: 144 Speed Level: AUTO AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF Disabled E_Port OFF ISL R_RDY Mode OFF RSCN Suppressed OFF Persistent Disable OFF NPIV capability ON QOS E_Port ON Mirror Port OFF To display FCIP tunnels configured on a GbE port. (refer to the portCfg help page for an explanation of the displayed parameters): switch:admin> portcfgshow 10/ge0 Mode: FCIP Persistent Disable: OFF Ipif configuration: Interface IP Address NetMask MTU 0 192.168.60.100 255.255.255.0 1500 1 192.168.60.101 255.255.255.0 2348 2 192.168.60.102 255.255.255.0 1260 3 192.168.60.103 255.255.255.0 1700 4 192.168.60.104 255.255.255.0 1400 5 192.168.60.105 255.255.255.0 2000 6 192.168.60.106 255.255.255.0 1300 7 192.168.60.107 255.255.255.0 2200 Interface IPv6 Address Len MTU Arp configuration: IP Address Mac Address Iproute Configuration: IP Address Mask Gateway Metric IPv6ddress Len Gateway Metric Fciptunnel configuration: IPV4 FCIP TUNNEL(S Tunnel ID 0 Remote IP Addr 192.168.60.180 Local IP Addr 192.168.60.100 Remote WWN Not Configured 468 Fabric OS Command Reference 53-1000599-02