HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 696
traceDump, Removes the content of a trace dump from all slots.
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 696 highlights
2 traceDump traceDump Displays, initiates, or removes a trace dump. Synopsis tracedump [-S][-s slot] tracedump -n [-s slot] tracedump -r [-s slot] tracedump -R Description Use this command to initiate a background trace dump, to remove the content of a trace dump, or to display the dump status on the switch. If there is no parameter specified, this command defaults to traceDump -S. The default remote file name format is chassisname-S#-YYYYMMDDHHMMSS.dmp, in which # is the slot number (0 on nonbladed systems) and YYYYMMDDHHMMSS (year-month-day-hour-minute-second) is the trace dump time. If a non-bladed system has an embedded BP, two trace dumps will be generated, a*.dmp file for the main switch and a *.tar.gz archive for the embedded BP. Operands This command has the following mutually exclusive operands: -S Displays dump status. -n Initiates a background trace dump. -r Removes the content of a trace dump. -R Removes the content of a trace dump from all slots. This command has the following optional operand: -s slot Specifies the slot number from which a trace dump is generated. If this is not supplied, the trace dump is generated from the local slot. This operand is optional. Examples To initiate a background trace dump from slot 5: switch:admin> tracedump -n -s 5 See Also To remove a trace dump: switch:admin> tracedump -r trace dump removed supportFtp, supportSave, supportShow 670 Fabric OS Command Reference 53-1000599-02