HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 397

nsZoneMember 2 nsZoneMember Displays the information of all the online devices zoned with the given device. Synopsis nszonemember -a | -u | pid | wwn Description Use this command to display information about all the online devices zoned with the given device. Issuing this command without operands displays all online devices zoned with the given device. Each line of output displays the following information: Type U for unknown, N for N_Port, NL for NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's port World Wide Name (WWN). NodeName The device's node WWN. Permanent Port Name The physical N_Port or NL_Port WWN. DeviceType The device's type. Port Index The index of the port to which the device is attached. Shared Area Whether or not the device shares an area with other devices. Device Shared in Other AD Whether or not the device is shared in other Admin Domains. Additional lines may display if the device has registered any of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4 supported • IP address (node) • IPA • port and node symbolic name (local device only) • fabric port name • hard address or port IP address Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: -a Displays each local device's online zoned device data, including the PID and zone alias. -u Displays all the unzoned devices in the entire fabric. The device data displayed includes the device PID and zone alias. pid | wwn Specifies the port ID or WWN, whose zoned devices are to be viewed. This operand is required. Fabric OS Command Reference 371 53-1000599-02