HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 413

pdShow 2 pdShow Displays data from a panic dump file. Synopsis pdshow [panic_dump_file] Description Use this command to display data from a panic dump file. The panic dump file contains information that might be useful to determine the cause of the system panic. When executed without any arguments, this command displays output from the latest panic dump file available on the switch. If a panic dump file is specified as an argument, the contents of that specific file are displayed. Note The execution of this command is subject to Admin Domain restrictions that may be in place. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following optional operand: panic_dump_file Specify the full path name of a panic dump file. Examples To examine a panic dump file by the name panic_dump located under the directory /tmp: switch:admin> pdshow /tmp/panic_dump *** CAUTION *** * Host PLATFORM (current) is: 'Unknown' * PLATFORM got from pd file is: 'SW12000' * Some results shown may be incorrect and/or missing * It is best if this command is run on same PLATFORM as that of pdfile * File :/core_files/panic/core.pd1038932352 * * SECTION:PD_MISC * WatchDogRegister=0x0 Section=Startup time: Tue Dec 3 16:06:11 UTC 2002 Kernel= 2.4.19 Fabric OS= v4.1.0_j_dist_1103 Made on= Tue Dec 3 19:07:13 2002 Flash= Tue Dec 3 13:19:06 2002 BootProm= 3.2.0 Section=HA show Output (output truncated) See Also portLogDump, supportSave Fabric OS Command Reference 387 53-1000599-02