HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 714
usbStorage, Removes data in a specified application storage space. Valid applications
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 714 highlights
2 usbStorage usbStorage Manages data files on an attached USB storage device. Synopsis usbstorage [-e | --enable] usbstorage [-d | --disable] usbstorage [-l | --list] usbstorage [-r | --remove application area usbstorage [-h | --help] Description Use this command to control a USB device attached to the Active CP. When the USB device is enabled, other applications, such as supportSave, firmwareDownload, firmwareKeyupdate, or configDownload/cfgUpload can conveniently store and retrieve data from the attached storage device. Refer to the help pages for these commands for specific information on how the USB device is accessed by each application. Notes This command is available only on the Active CP. This command is not available on all platforms. Refer to the Fabric OS Administrator's Guide for details. Operands All operands are exclusive. Only one operand can be specified, followed by suboperands if applicable. -e | --enable Enables the USB device. The USB device must be enabled before the list and remove functions are available. -d |--disable Disables an enabled USB device. This command prevents access to the device until it is enabled again. This command may fail if USB storage is busy doing a read/write operation. -r |--remove application area Removes data in a specified application storage space. Valid applications are: firmware, support, config, firmwarekey. A specified application must be followed by an application area. Any existing file in a given application directory can be specified. This command removes all data associated with the specified application area. -l |--list Lists the content of the USB device up to two levels down from the root directory. -h |--help Displays command usage Examples To enable an attached USB device: swicth:admin> usbstorage -e USB storage enabled To list the contents of the attached USB device: switch:admin> usbstorage -l firmwarekey\ 0B support\ 106MB support1034\ 105MB config\ 0B 2007 Aug 15 15:13 2007 Aug 24 05:36 2007 Aug 23 06:11 2007 Aug 15 15:13 688 Fabric OS Command Reference 53-1000599-02