HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 334

2 iscsiPortCfg iscsiPortCfg Displays or modifies iSCSI port parameters. Synopsis iscsiportcfg --clearstats slot/geport iscsiportcfg --default slot/geport iscsiportcfg --show slot/geport [-v] iscsiportcfg --modify slot/geport options Description Use this command to display or modify the iSCSI port parameters. The default iSCSI port settings are as follows: TABLE 16 Default iSCSI port settings Setting Default Error recovery level Connections per session Connections per session Header digest support Immediate data support First burst length value 0 1 Disabled Disabled No 512 Note Operands The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. This command has the following operands: --modify Modifies the port parameters on the specified port. Valid options are: -e value Specifies the error recovery level; values are 0, 1, or 2. -c value Specifies the TCP of connections; values are 1 or 2. -d value Enables or disables data digest support; specify 0 to disable or 1 to enable. -a value Enables or disables header digest support; specify 0 to disable or 1 to enable. -i value Enables or disables immediate data support; specify 0 to disable or 1 to enable. -f value Specifies the first burst length value; values include 512, 1024, 2048, 4096, 8192, 16384, and 32768. --clearstats Clears port-level iSCSI statistics on the specified port. --default Resets the port to the default values. See the "Description" section for the list of default values. 308 Fabric OS Command Reference 53-1000599-02