HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 542
Otherwise, displays N/A.
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 542 highlights
2 portShow BB XLate Information on the xlate (translate) phantom domain presented at this port. Includes the preferred (if not active) or actual (if active) domain ID for the xlate phantom domain and the WWN of the xlate phantom domain. The xlate phantom domain connected at this port is in the same fabric as the router and represents the edge fabric connected to the EX_Port. Authentication Type Displays NONE or DH-CHAP. DH-CHAP is the only authentication type supported on EX_Ports. DH Group Displays DH group [0-4] if DH-CHAP authentication is used. Otherwise displays N/A. Hash Algorithm Displays hash type (MD5 or SHA-1) if DH-CHAP authentication is used. Otherwise, displays N/A. Edge fabric's primary WWN If the EX_Port is connected to an edge switch with FCS policy enforcement, the WWN of the primary FCS is displayed when the edge fabric is secure and the primary FCS is online. Otherwise, displays "No Primary". Edge fabric's version stamp If the EX_PORT is connected to an edge switch with FCS policy enforcement, the version of the security database is displayed. Otherwise displays N/A. Following the general information, the command displays three columns of counters. The first column shows interrupt statistics: Interrupts Total number of interrupts. Unknown Interrupts that are not counted elsewhere. Lli Low-level interface (physical state, primitive sequences). Proc_rqrd Frames delivered for embedded N_Port processing. Timed_out Frames that have timed out. Rx_flushed Frames requiring translation. Tx_unavail Frames returned from an unavailable transmitter. Free_buffer Free buffer available interrupts. Overrun Buffer overrun interrupts. Suspended Transmission suspended interrupts. Parity_err Central memory parity errors. 2_parity_err Secondary transmission parity errors. CMI_bus_err Control message interface errors. The second column displays link error status block counters. The third column shows the number of F_RJTs and F_BSYs generated. For L_Ports, the third column also displays the number of loop initialization protocols (LIPs) received, number of LIPs transmitted, and the last LIP received. 516 Fabric OS Command Reference 53-1000599-02