HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 190

2 fcrConfigure fcrConfigure Sets FC Router configuration parameters. Synopsis fcrconfigure Description Use this command to configure the FC Router parameters for this platform. This is an interactive command. This command cannot execute on a system with the FC Router feature enabled. First disable FC routing by using fosConfig or disable the switch with switchDisable. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command interactively prompts for the following parameter: Backbone Fabric ID A fabric ID uniquely identifies a fabric in FC Router configurations. The backbone fabric is the fabric attached to the U_Ports-for example, E/F_Ports-of this switch. The backbone fabric ID must be unique across all FC Router-connected fabrics. The current Backbone Fabric ID can be displayed using the switchShow command. Examples To configure FC Router parameters: fcr:admin> fcrconfigure FC Router parameter set. to skip a parameter Backbone fabric ID: (1-128)[100] See Also fosConfig, switchDisable, switchEnable, switchShow 164 Fabric OS Command Reference 53-1000599-02