HP StorageWorks 8/80 Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000 - Page 558

2 portStatsShow er_other_discard er_zone_discard er_type1_miss er_type2_miss er_type6_miss er_zone_miss er_lun_zone_miss er_crc_good_eof er_inv_arb open transfer opened starve_stop fl_tenancy nl_tenancy zero_tenancy The number of other discards (platform- and port-specific). The number of class 3 frames discarded due to zone mismatch. The number of frames with FTB type 1 miss. The number of frames with FTB type 2 miss. The number of frames with FTB type 6 miss. The number of frames with hard zoning miss. The number of frames with LUN zoning miss. The number of CRC errors with good EOF (platform- and port-specific). The number of invalid ARBs. The number of times the FL_Port entered OPEN state. The number of times the FL_Port entered TRANSFER state. The number of times the FL_Port entered OPENED state. The number of loop tenancies stopped due to starvation. The number of times FL_Port had loop tenancy. The number of times NL_Port had loop tenancy. The number of times zero tenancy occurred. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). [ge]portnumber Specifies a port number to be configured, relative to its slot for bladed systems. Specify the optional ge option to display the GbE port hardware statistics. Use switchShow to display a list of valid ports. ge Displays the GbE statistics. ip Displays all the GbE port statistics related to IP addresses that are on (not zero). ipaddress Optionally specify an IP address to display statistics only for the specified IP address. fcip Displays the GbE statistics on all FCIP tunnels. tunnelnumber Optionally specify a tunnel ID to display statistics only for the specified FCIP tunnel. Examples To display the basic set of statistics for port 1/0 on a DCX backbone: switch:admin> portstatsshow 13 stat_wtx 1979747673 stat_wrx 618367 stat_ftx 1958745847 4-byte words transmitted 4-byte words received Frames transmitted 532 Fabric OS Command Reference 53-1000599-02